SouthbridgeDrywall Repair Co.

(774) 483-3694Call 7 days, 7am–9pm

Drywall Hole Patching in Southbridge, MA

How is a hole in drywall actually fixed so you can't find it later? Drywall hole patching in Southbridge follows the same rule as anywhere: the bigger the hole, the more support the patch needs behind it. The trick is the finishing, because a patch that's flat and the right texture is invisible, and one that's slightly proud of the wall shows every time light crosses it.

Hole sizes: three repairs for three sizes

Which repair does your hole need? Here's how size decides it.

Nail and anchor size

Small holes are cleaned of loose paper, filled with lightweight compound, and sanded flush. Anchors that pulled out usually leave a cone of broken gypsum that gets cut back first.

Up to fist size

A doorknob hole is squared up and closed over with sticky fiberglass mesh, or a patch cut with a paper flange, then built up with several thin coats.

Larger than that

The opening is cut back to a clean rectangle, wood backing is screwed in behind the edges or the patch is fastened to the studs, new board goes in flush, and the seams are taped and coated.

Trade openings: after the plumber or electrician

Who closes the openings other trades cut? That's part of this work, once their job is finished.

Access holes for new wiring, plumbing access under a bathroom and cutouts for heat-pump line sets are closed the same way as any large hole: squared, backed, boarded and taped. Where an access panel makes more sense, for example over a shutoff valve, it's worth asking for one instead of a patch. In older houses the surrounding wall may be plaster, and then the new piece is shimmed out to match its depth; see plaster wall repair on lath.

Patch questions: texture, single holes, paint and mess

Can you match the texture on my wall?
Yes. Smooth walls are feathered and sanded; orange peel and knockdown go on with a hopper gun or roller, then get flattened to blend with the wall around it.
Will you come out for one hole?
Yes. One hole behind a door counts as a proper job here. If you have a few others around the house, bundle them into the same visit.
Will I see the patch through the paint?
Not once it's primed. Unprimed compound absorbs paint differently and shows as a dull patch, which is why the repair is primed before painting.
How messy is a hole repair?
Not very. The floor under the patch is covered, and sanding is limited to the repair area.

Typical costs: holes in national cost guides

What does hole patching usually cost? A national guide gives a ballpark.

On Fixr.com, the national figures for fixing a drywall hole run about $60 to $200 for labor and materials, and a typical drywall repair overall at roughly $200 to $550. Those figures are national averages, not prices for Southbridge. The quote depends on the size and number of holes, texture, ceiling height and whether the wall is plaster. If a few holes came with a cracked corner, ask about fixing the crack in the same visit.

Got a hole to close? Ask for a patching quote, or confirm we reach your town on the areas page.

Before you call about holes, the prep list on the home page covers photos, size and access.

Want this repair looked at? A price comes first, before any work.

Once the details reach us, a nearby repair pro calls to book a visit and look at the damage.

Call (774) 483-3694Text a quick photo